Machine Connectivity with OpexFlow

Connect machines to OpexMX with OpexFlow, the middleware that bridges edge connectors, industrial protocols, and digital twin into one maintenance data spine.

Lanjutan

Estimasi 3 jam8 modul0% selesai

Modul

1. What OpexFlow Does15 menit

How OpexFlow closes the gap between shop-floor machines and the OpexMX maintenance layer.

2. Edge Connector on Raspberry Pi20 menit

Deploy the single Rust binary that reads Modbus TCP, OPC-UA, and MQTT from PLCs and sensors.

3. Modbus TCP and OPC-UA20 menit

Pick the right industrial protocol per asset and read registers and tags without guesswork.

4. MQTT as the Connectivity Spine20 menit

Why MQTT publish/subscribe carries every other protocol off the floor and into OpexMX.

5. Fanuc CNC via FOCAS Agent20 menit

Read Fanuc CNC axes, spindle, status, and alarms through the FOCAS Agent and into MQTT.

6. Buffering, Retry, and Data Quality20 menit

How the local SQLite buffer and retry queue keep data intact through outages and bad readings.

7. Digital Twin and Floor Layout20 menit

Use the visual floor plan, asset placement, and real-time status overlays to see the floor live.

8. Rollout Playbook for Connectors15 menit

Pilot one line, validate readings, then scale, with edge-device security baked in from day one.

Machine Connectivity with OpexFlow

Pilih modul dari sidebar untuk mulai belajar, atau lanjutkan dari yang terakhir.

Mulai Belajar