Predictive & Reliability Engineering

Move beyond time-based PM to condition-based maintenance, remaining useful life estimation, and reliability engineering so your team stops fixing the same asset twice.

Lanjutan

Estimasi 3 jam9 modul0% selesai

Modul

1. Reactive vs Preventive vs Predictive15 menit

Compare the three maintenance strategies and learn when predictive maintenance earns its cost.

2. Condition Monitoring and Alert Fatigue20 menit

Watch asset signals continuously and set thresholds that catch failures without drowning technicians in noise.

3. Remaining Useful Life (RUL)20 menit

Estimate how long an asset has before failure and turn that estimate into a planning number.

4. Vibration, Temperature, Oil, and Current Signals20 menit

Match each sensor type to the failure family it reveals and connect it to the Vibration Analyzer.

5. FMEA: Enumerate Failure Modes and Prioritize25 menit

Build a Failure Modes and Effects Analysis and rank modes by severity, occurrence, and detection.

6. RCM: Choosing the Right Maintenance Task20 menit

Apply Reliability-Centered Maintenance logic to choose run-to-failure, on-condition, restoration, or redesign.

7. OEE, MTTR, and MTBF as Decision Drivers20 menit

Use OEE, MTBF, and MTTR by asset to drive maintenance decisions and expose bad actors.

8. Problem Management and Root Cause Analysis20 menit

Track bad actors and recurring failures, then run RCA to fix the root cause instead of the symptom.

9. Predictive Maintenance Best Practices15 menit

Start small on critical assets, validate value before scaling, and close every prediction loop.

Predictive & Reliability Engineering

Pilih modul dari sidebar untuk mulai belajar, atau lanjutkan dari yang terakhir.

Mulai Belajar